
Chapter 10 Internet Connection
Requirements:
a. Router and Rekorder have to be connected correctly
b. Rekorder and camera are already accessible over the internal network
connection
c. Networkaddress-configuration is made via DHCP (if not, please change
the settings within your router to DHCP)
If you want to connect to live-images or recordings on your recorder, you first have to allow this access
to your network from outside. This configuration has to be made within the router-system.
1. Open the configuration panel of your router
Often it ist he internal ip-adress:
http://192.168.2.1 which has to be
entered in your browser.
2. Go to the menu-point „network“.
3. Go to “Port forwarding” or “NAT”
4. Establish a new Port Forwarding (TCP/IP, Webserver). To do that, you
have to enter the port (Standard-Port is 80, but you can also use 888) as
well as the IP-Adress of your Recorder. The IP-Adress as well as the port
of your Recorder is to be found within the Network and/or Status Items of
your recorder menu.
5. Then, Please go to
http://www.dyndns.com/ and sign up a free account:
1. Enter DynDNS website. On the top right hand corner click “Create Account” to start creating an
account. Please remember your account and password, because this account will be your future
login account.
Comentarios a estos manuales